For good reason, Google Chrome is one of the most popular online browsers. Chrome is one of the greatest browsers accessible because of its different capabilities, which allow you to browse the Internet while saving data. One noticeable problem with the Chrome browser is the “server IP address not found” warning.

This error does not have a single cause, thus the actions you must take to investigate and address the problem are detailed in this article.

1. Verify your network connection

If you are experiencing this problem, the first thing you should do is verify your network connection. There is a risk that you are not online. In this instance, Chrome is no longer to fault. A browser cannot surf the web without the Internet.

To rapidly test whether your internet connection is active, utilise Prompt’s ping feature.

1. Go to the Start menu and choose Command Prompt. A Command Prompt panel will display.

2. In the Command Prompt, type the next line and press Enter. This command returns the final result of four examinations of google.com.

3. Examine the results.

Your hyperlink is valid if you obtain a response in a reasonable amount of time. If you observe an expired request or any problem with your connection, you should investigate it.

2. Check the proxy setup

One possible cause for the problem is an unavailable or defective proxy server. It’s also conceivable that the individual set up a proxy that isn’t now operational, or that it was caused by computer software. You can choose to disable the proxy for all proxy settings or install a new proxy.

Step 1: In the Start menu, type “poxy” and select Proxy Settings.

2. Disable automatic detection in the proxy settings box.

3. To disable the drive proxy, swipe down to reveal its settings.

4. Launch Chrome to see whether the discomfort has vanished.

3. Clear your DNS cache

It appears rational to clear your own DNS cache because there may be a problem with the DNS lookup provider identifying the correct IP address. This restores and eliminates the “server IP address not found” bug on startup. The good news is that we cover this approach in depth on the Linux (Ubuntu), macOS, and Windows platforms. Remember that in order to achieve this, you must use the command line on Windows or the terminal on macOS. You will, however, find all of the information you need to use these apps to clear the cache on this website. From there, you may start investigating specific proxy server settings, the IP address itself, and so on.

4. Modify the server and DNS address

The DNS address on your local computer can also be modified. Some folks prefer utilising Cloudflare or Google’s public DNS. There are numerous options for Windows and macOS, independent of the DNS address.

Reopen System Preferences > Network > Advanced Display on a Mac. It’s time to retrieve the DNS tab. To add public DNS addresses, select the More button in the DNS Server section. This will confirm the changes you made.

Return to the Network and Internet page in Windows, and then choose Ethernet Connection from the sidebar. We recommend that you alter the following link. Select adapter settings; then, right-click the connection and select Properties. Select the Network tab, Internet Protocol Version 4 or Version 6, and then click the Properties button in the pop-up box. On the following screen, select the Use DNS Server Addresses radio box and enter your public DNS address. If you have made it inside After checking the changes and restarting the system, check for the “server IP address not found” error. If it does not appear, continue on.

5. Change the network adapter configuration

The network card may automatically receive an IP address and is configured to utilise DHCP by default. If you change this setting, you will also need to configure the switch’s DNS and IP addresses. The Control Panel is where you may alter the DHCP settings.

Please complete the following tasks.

1. Open the Control Panel and select Network and Internet.

2. Select Network and Sharing Centre.

3. In the left menu bar of the Network and Sharing Centre, select Adjust adapter settings.

4. A new window will appear, displaying all network adapters. Select Properties by right-clicking on the blank paper.

5. To access the dwellings, double-click Internet Protocol Version Four (TCP / IPv4).

6. Select Get DNS server address or Get IP address automatically.

7. To save your changes, click OK.

8. Launch Chrome to test if the problem has been resolved.

6. Update the network drivers

Another common source of problems in the community is a lack of proper drivers for your hardware. This might happen when the best software package is unplugged or the drivers are out of current. You have no idea that Windows 10 is going through an unbelievable mechanical method to identify and install drivers.

To update the driver network, take the following steps:

1. Launch File Explorer.

2. Toggle My Computer to the right.

3. From the list, select Administration. The window for computer administration will appear.

4. Select Device Manager from the System Tools option on the left.

5. To update the driver, right-click the adapter in the Network Adapters list and select Update Driver. If Windows finds new drivers, it will install them.

7. Run the Network Diagnostics programme on Windows

If your network is not properly setup, Google Chrome will not work as expected. Fortunately, the Windows troubleshooter can efficiently identify and resolve configuration-related errors.

1. Open Troubleshoot Settings from the Start menu.

2. Choose Internet Connections from the Startup menu.

3. Choose “Start Troubleshooting.” Follow the steps provided by the troubleshooter. The troubleshooter will often be able to resolve the difficulties discovered on their own.

If it is not authorised, it may offer you with instructions on how to remedy the problem on your own.

In summary:

If you acquire a dedicated server and develop your own website, be sure your IP address is properly configured. I hope you have a comprehensive knowledge of the topic. If you have any difficulties, please let us know using the feedback form below.